Connectors

USB type C connector 16 pin

Reference	Package	Value	Quantity	Rating	Note
J202	TYPE-C-31-M-12	USB C connector 16 pin	1

Any manufacturer 16 pin USB connector using the typical generic package.

Example:

• TYPE-C-31-M-12

3P female 2.54mm low profile milled pin header

Reference	Package	Value	Quantity	Rating	Note
J201	3P * 2.54mm	3P female milled header, low profile	1		milled, low profile

This programming header fits a hole in the bottom of the case. Low profile, milled header should be used.

danger

Common stamped pin header is too tall for the enclosure design.

Example:

• 3P * 2.54mm female milled header

10P male 2.54mm right angle (90 degrees) shrouded connector

Reference	Package	Value	Quantity	Rating	Note
J301	10P	TJC8A-10, HX25418-10WA, etc	1		IO pin silkscreen applied from REV10+

This is a common locking shrouded 2.54mm pin header. Various part numbers in the market include TJC8A-10, HX25418-10WA, etc

info

Starting from REV10 IO pin names are silkscreened on the main 10P connector. The supplier is a small company that specializes in silkscreening odd shaped electronics such as wireless bluetooth in-ear headphones.

Examples:

• HX25418-10WA
• HX25418-10WA

9P male 1.0mm right angle (90 degrees) JST SH compatible connector

Reference	Package	Value	Quantity	Rating	Note
J302	SH-SM09B-SRRS-TB	SH 9 pin connector, right angle, SMD (1.0mm pitch)	1

Use a JST SH-SM09B-SRRS-TB compatible part, not the much more expensive original.

tip

Use a "JST SH" (1.0mm) compatible connector, not the original. There are lots of Chinese domestic manufacturers of compatible parts.

Example:

• A1002WR-S-9P
• Taobao example